 |
Infinova's N3542 and N3742 series provides the ability to transmit 2 digitally encoded video channels over one optic fiber.
Modular in design, the N3542 and N3742 series can be rack-mounted or used as a stand-alone module. Rack mounting requires the N3910 series subrack. Stand-alone module is accomplished with N3910-1S and can be placed on a desktop or mounted to a wall.
- 10 bits digitally encoded video transmission
- NTSC, PAL, and SECAM auto compatible
- Surface mount technology
- LED indicators for monitoring of system operating status
- Surge protection
- Highest optical dynamic range
- Immune to EMI and RFI
- Dense structure for easy installation
- Hot swappable rack mount cards
- Automatic re-settable fuses, short circuit protection
- 12 VDC or 24 VAC power supply
- Industry standard connectors
- No user adjustments required
N3542TA-M
FO MM TX, 2V In, Module, 12VDC/24VAC
N3542TA-R
FO MM TX, 2V In, Card, 1-Slot
N3542RA-M
FO MM RX, 2V Out, Module, 12VDC/24VAC
N3542RA-R
FO MM RX, 2V Out, Card, 1-Slot
N3742TA-M
FO SM TX, 2V In, Module, 12VDC/24VAC
N3742TA-R
FO SM TX, 2V In, Card, 1-Slot
N3742RA-M
FO SM RX, 2V Out, Module, 12VDC/24VAC
N3742RA-R
FO SM RX, 2V Out, Card, 1-Slot
|
Fiber Type |
Optical Budget (dB) |
Wavelength (nm) |
Range (km) |
|
Multi-mode |
7 |
1310 |
2.2 |
|
Single-mode |
17 |
1310 |
25 |
|
*Higher output lasers available for range over 25km |
|||
Note:
1. Distance is limited to fiber loss, splices, chromatic dispersion and bandwidth
2. Range estimates are based on 1.0dB/km @ 1310nm on MM fiber, 0.35dB/km @1310nm on SM fiber, and include a 3dB safety factor
3. Range estimates for multimode are based on 1000MHz/km fiber
|
Video Performance |
Video Channel |
2 |
|
Video Input Impedance |
75Ohm |
|
|
Video Voltage |
1.0Vp-p |
|
|
Bandwidth |
5Hz~6.5MHz |
|
|
Differential Gain |
1% (typical) |
|
|
Differential Phase |
1º (typical) |
|
|
Signal-to-Noise Ratio |
67dB (weighted) |
|
|
PCM Encoding |
10 bits |
|
|
Optical Performance |
Multi-mode |
|
|
Output Power |
-12dBm (typical) |
|
|
Receiver Sensitivity |
-19dBm (typical) |
|
|
Wavelength |
1310nm |
|
|
Connector |
ST |
|
|
Single-mode |
||
|
Output Power |
-5dBm (typical) |
|
|
Receiver Sensitivity |
-22dBm (typical) |
|
|
Wavelength |
1310nm |
|
|
Connector |
FC |
|
|
LED Indicators |
Power On |
Red |
|
Optical Link Loss |
Red |
|
|
Video Input/Output Presence |
Green |
|
|
General Parameters |
Operating Temperature |
-40°F ~ 167°F (-40°C ~ 74°C) |
|
Storage Temperature |
-40°F ~ 185°F (-40°C ~ 85°C) |
|
|
Operating Humidity |
0 ~ 95% RH (non-condensing) |
|
|
Card Dimensions (W ×H ×D) |
0.79" x 5.08" x 6.73" (20mm x 129mm x 171mm) |
|
|
Module Dimensions (W ×H × D) |
0.94" x 6.22" x 7.87" (24mm x 158mm x 200mm) |
|
|
Power Consumption |
2.5W |
|
|
Card Weight |
0.88lbs. (0.40kg) |
|
|
Module Weight |
1.63lbs. (0.74kg) |
|
|
Mean Time Between Failures |
>100,000 Hrs |
|
|
Certifications |
FCC: Part 15 Subpart B (Certificate No.: BCT09HC-717E) |
|
|
CE/EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3 (Certificate No.: BCT09HC-716E) |
||
|
ISO 9001:2008 |
||