 |
V1407 series are large camera housings for both indoor and outdoor applications. The V1407 series are made of die-cast aluminum and meets the requirements of even the most demanding CCTV projects. All V1407 series housings can accommodate cameras with either fixed or vari-focal lenses. The housing cover can be opened through side latches. When the top cover is completely open, a unique pneumatic strut will support the cover, allowing easy access to the interior. There are two adjustable cable glands on the bottom of the housing for easy installation of power supply and video cable. There are one (V1407-16) or two (V1407-22) lock-in latches on both sides of the housing. A padlock (not provided) can be used to secure the latching system to provide enhanced access security. The V1407 series have an optional set of accessories which can be installed at the factory, including sunshield, heater, fan and rain wiper. Input power is available at 24 VAC. The V1407 series can be installed on either fixed mounts or pan/tilts.
- Indoor/outdoor installations with fixed mount or pan/tilt
- Die-cast aluminum
- Front opening top cover with pneumatic strut
- Two ports for cable glands on the housing bottom
- Side lock-in latch connection
- IP66 standard
- Easy installation and maintenance
- Optional blower, heater, sunshield and wiper
V1407-16
Camera housing, indoor/outdoor, 16 inch internal, pneumatic supporting lid
V1407-16S
Camera housing, indoor/outdoor, 16 inch internal, pneumatic supporting lid, w/ sun shield
V1407-16SHB
Camera housing, indoor/outdoor, 16 inch internal, pneumatic supporting lid, w/ sun shield, heater & blower, 24 VAC
V1407-22
Camera housing, indoor/outdoor, 22 inch internal, pneumatic supporting lid
V1407-22S
Camera housing, indoor/outdoor, 22 inch internal, pneumatic supporting lid, w/ sun shield
V1407-22SHB
Camera housing, indoor/outdoor, 22 inch internal, pneumatic supporting lid, w/ sun shield, heater & blower, 24 VAC
V1407W
Wiper for V1407 camera housing, 24 VAC
Recommended Installation Mounts
Wall mount
V1572-W
Wall Mount, Non-Adjustable for housing (V1405, V1406, V1407), 121.25 lbs. (55 kg) load
V1573
Mount Adapter, Adds H/V adjustability to V1572-W Wall Mount for housing (V1405, V1406, V1407), 44.09 lbs. (20 kg) load
V1574B
Pole Mount adapter for V1572-W
Note: V1572-W should work with V1573.
|
Camera Mounting |
The camera supporting board is removable and can be installed upside-down. |
|
|
Internal Usable Dimensions (L×W ×H) |
V1407-16: 15.75"×7.87"×5.12" (400mm×200mm×130mm) V1407-22: 21.77"×7.87"×5.12" (553mm×200mm×130mm) |
|
|
Window Thickness |
0.16" (4 mm) |
|
|
Window Dimensions (W×H) |
5.28"×4.25" (134 mm×108 mm) |
|
|
Cable Input |
Two compressed cable clamps with a maximum diameter of 0.48" (12 mm) are located on the bottom of the housing |
|
|
Lock-in Latch |
Stainless steel; padlock (not included) can also be used to secure |
|
|
Input Voltage |
24 VAC, 50/60 Hz |
|
|
Power Consumption |
Blower: 8 W; Heater: 36 W; Window Wiper: 5 W |
|
|
Auto Controlled Temperature |
Heater |
Turns on at 46°F ± 9°F (8°C ± 5°C); Turns off at 68°F ± 9°F (20°C ± 5°C) |
|
Blower |
Turns on at 99°F ± 9°F (37°C ± 5°C); Turns off at 68°F ± 9°F (20°C ± 5°C) |
|
|
Construction |
Die-cast aluminum |
|
|
Environment |
Indoor/outdoor |
|
|
Operating Temperature |
23°F ~140°F (-5°C ~ 60°C); -13°F ~140°F (-25°C ~ 60°C) (w/ heater) |
|
|
Unit Weight |
V1407-16: 14.33 lbs. (6.5 kg); V1407-22: 15.43 lbs. (7.0 kg) |
|
|
Shipping Weight |
V1407-16: 16.53 lbs. (7.5 kg); V1407-22: 17.64 lbs. (8 kg) |
|
|
Compliance |
CE, ISO 9001: 2008 |
|