 |
Infinova’s N3558 and N3758 series provides the ability to transmit 8 digitally encoded video channels with 2-ch audio and 2-ch data over one optic fiber. Data format supports factory default setting RS-232, DIP selectable RS-422, RS-485, Manchester or Biphase.
Modular in design, the N3558 and N3758 series can be rack-mounted or used as a stand-alone module. Rack mounting requires the N3910 series subrack. Stand-alone module uses the N3910-3S and can be place on a desktop or mounted to a wall.
- 10 bits digitally encoded video transmission
- NTSC, PAL, and SECAM auto compatible
- Surface mount technology
- Multiple audio format on-board jumper configurable
- Factory default setting RS-232 optional
- On-board DIP switch selection of RS-422, RS-485 (2 or 4 wires), Manchester/Biphase
- LED indicators for monitoring of system operating status
- On-board jumper activation of 120 Ohm termination resistor
- Surge protection
- Highest optical dynamic range
- Immune to EMI and RFI
- Dense structure for easy installation
- Hot swappable rack mount cards
- Automatic re-settable fuses, short circuit protection
- 12 VDC or 24 VAC power supply
- Industry standard connectors
- No user adjustments required
N3558TA-2A2D-M
FO MM TRX, 8V In, 2D IO, 2A IO, Module, 12VDC/24VAC
N3558TA-2A2D-R
FO MM TRX, 8V In, 2D IO, 2A IO, Card, 3-Slot
N3558RA-2A2D-M
FO MM TRX, 8V Out, 2D IO, 2A IO, Module, 12VDC/24VAC
N3558RA-2A2D-R
FO MM TRX, 8V Out, 2D IO, 2A IO, Card, 3-Slot
N3758TA-2A2D-M
FO SM TRX, 8V In, 2D IO, 2A IO, Module, 12VDC/24VAC
N3758TA-2A2D-R
FO SM TRX, 8V In, 2D IO, 2A IO, Card, 3-Slot
N3758RA-2A2D-M
FO SM TRX, 8V Out, 2D IO, 2A IO, Module, 12VDC/24VAC
N3758RA-2A2D-R
FO SM TRX, 8V Out, 2D IO, 2A IO, Card, 3-Slot
|
Fiber Type |
Optical Budget (dB) |
Wavelength (nm) |
Range (km) |
|
Multi-mode |
7 |
1310/1310 |
2.2 |
|
Single-mode |
17 |
1310/1550 |
25 |
|
*Higher output lasers available for range over 25km |
|||
Note:
1. Distance is limited to fiber loss, splices, chromatic dispersion and bandwidth
2. Range estimates are based on 1.0dB/km @ 1310nm on MM fiber, 0.35dB/km @1310nm and 0.25dB/km @1550nm on SM fiber, and include a 3dB safety factor
3. Range estimates for multimode are based on 1000MHz/km fiber
|
Video Performance |
Video Channel |
8 |
|
Video Input Impedance |
75Ohm |
|
|
Video Voltage |
1.0Vp-p |
|
|
Bandwidth |
5Hz~6.5MHz |
|
|
Differential Gain |
1% (typical) |
|
|
Differential Phase |
1º (typical) |
|
|
Signal-to-Noise Ratio |
67dB (weighted) |
|
|
PCM Encoding |
10 bits |
|
|
Audio Performance |
Format |
600 Ohm (balanced/unbalanced) (Jumper Selectable); 10kOhm/47kOhm (unbalanced) |
|
Audio Level |
-6 ~ +6dBm |
|
|
Frequency Response |
10Hz ~ 20kHz |
|
|
Signal-to-Noise Ratio |
75dB (weighted) |
|
|
Optical Performance |
Multi-mode |
|
|
Output Power |
-12dBm (typical) |
|
|
Receiver Sensitivity |
-19dBm (typical) |
|
|
Wavelength |
1310/1310nm |
|
|
Connector |
ST |
|
|
Single-mode |
||
|
Output Power |
-5dBm (typical) |
|
|
Receiver Sensitivity |
-22dBm (typical) |
|
|
Wavelength |
1310/1550nm |
|
|
Connector |
FC |
|
|
Data Performance |
Data Rate |
DC to 115.2kbps |
|
Bit Error Rate |
<10-9 |
|
|
LED Indicators |
Power On |
Red |
|
Optical Link Loss |
Red |
|
|
Video Input/Output |
Green |
|
|
Data Input/Output |
Green |
|
|
General Parameters |
Operating Temperature |
-40°F ~ 167°F (-40°C ~ 74°C) |
|
Storage Temperature |
-40°F ~ 185°F (-40°C ~ 85°C) |
|
|
Operating Humidity |
0 ~ 95% RH (non-condensing) |
|
|
Card Dimensions (W ×H ×D) |
2.40" x 5.08" x 6.73" (61mm x 129mm x 171mm) |
|
|
Module Dimensions (W ×H × D) |
2.56" x 6.22" x 7.87" (65mm x 158mm x 200mm) |
|
|
Power Consumption |
7.4W |
|
|
Card Weight |
1.61lbs. (0.73kg) |
|
|
Module Weight |
2.95lbs. (1.34kg) |
|
|
Mean Time Between Failures |
>100,000 Hrs |
|
|
Certifications |
FCC: Part 15 Subpart B (Certificate No.: BCT09HC-819E) |
|
|
CE/EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3 (Certificate No.: BCT09HC-818E) |
||
|
ISO 9001:2008 |
||
|
Compliance |
UL, cUL |
|