 |
Infinova’s N3571 and N3771 series provides the ability to transmit and receive one RS-232 and one DIP selectable data (RS-422, RS-485, Manchester or Biphase) over one or two fibers.
Modular in design, the N3571 and N3771 series can be rack-mounted or used as stand-alone module. Rack mounting requires the N3910 series subrack chassis. Stand-alone module used the N3910-1S and can be placed on a desktop or mounted to a wall.
- Surface mount technology
- On-panel DIP switch selection of RS-422, RS-485 (2 or 4 wires), Manchester/Biphase
- On-panel DIP activation of 120 Ohm termination resistor
- LED indicators for monitoring of system operating status
- Surge protection
- Highest optical dynamic range
- Immune to EMI and RFI
- Dense structure for easy installation
- Hot swappable rack mount cards
- Automatic re-settable fuses, short circuit protection
- 12 VDC or 24 VAC power supply
- Industry standard connectors
- No user adjustments required
N3571XA-1D1B-M
FO MM TRX, 1D IO +1 RS-232, Module, 12VDC/24VAC
N3571XA-1D1B-R
FO MM TRX, 1D IO +1 RS-232, Card, 1-Slot
N3571XB-1D1B-M
FO MM TRX, 1D IO +1 RS-232, Module, 12VDC/24VAC
N3571XB-1D1B-R
FO MM TRX, 1D IO +1 RS-232, Card, 1-Slot
N3771XA-1D1B-M
FO SM TRX, 1D IO+1 RS-232, Module, 12VDC/24VAC
N3771XA-1D1B-R
FO SM TRX, 1D IO+1 RS-232, Card, 1-Slot
N3771XB-1D1B-M
FO SM TRX, 1D IO+1 RS-232, Module, 12VDC/24VAC
N3771XB-1D1B-R
FO SM TRX, 1D IO+1 RS-232, Card, 1-Slot
|
Fiber Type |
Optical Budget (dB) |
Wavelength (nm) |
Range (km) |
|
Multi-mode |
12 |
1310/1310 |
4.4 |
|
Single-mode |
20 |
1310/1550 |
25 |
|
*Higher output lasers available for range over 25km |
|||
Note:
1. Distance is limited to fiber loss, splices, chromatic dispersion and bandwidth
2. Range estimates are based on 1.0dB/km @ 1310nm on MM fiber, 0.35dB/km @1310nm and 0.25dB/km @1550nm on SM fiber, and include a 3dB safety factor
3. Range estimates for multimode are based on 500MHz/km fiber
|
Optical Performance |
Multi-mode |
|
|
Output Power |
-15dBm (typical) |
|
|
Receiver Sensitivity |
-27dBm (typical) |
|
|
Wavelength |
1310/1310nm |
|
|
Connector |
ST |
|
|
Single-mode |
||
|
Output Power |
-10dBm (typical) |
|
|
Receiver Sensitivity |
-30dBm (typical) |
|
|
Wavelength |
1310/1550nm |
|
|
Connector |
FC |
|
|
Data Performance |
Data Rate |
DC to 115.2kbps |
|
Bit Error Rate |
<10-9 |
|
|
LED Indicators |
Power On |
Red |
|
Optical Link Loss |
Red |
|
|
Data Input/Output |
Green |
|
|
General Parameters |
Operating Temperature |
-40°F ~ 167°F (-40°C ~ 74°C) |
|
Storage Temperature |
-40°F ~ 185°F (-40°C ~ 85°C) |
|
|
Operating Humidity |
0 ~ 95% RH (non-condensing) |
|
|
Card Dimensions (W ×H ×D) |
0.79" x 5.08" x 6.57" (20mm x 129mm x 167mm) |
|
|
Module Dimensions (W ×H × D) |
0.94" x 6.22" x 7.76" (24mm x 158mm x 197mm) |
|
|
Power Consumption |
1.9W |
|
|
Card Weight |
0.82lbs. (0.37kg) |
|
|
Module Weight |
1.57lbs. (0.71kg) |
|
|
Mean Time Between Failures |
>100,000 Hrs |
|
|
Certifications |
N3571 |
FCC: Part 15 Subpart B, Class A (Certificate No.: RSZ07070303) |
|
CE/EMC: EN 55022, EN 55024 (Certificate No.: RSZ07070303-1, RSZ07070303-2) |
||
|
N3771 |
FCC: Part 15 Subpart B, Class A (Certificate No.: RSZ08041602) |
|
|
CE/EMC: EN 55022, EN 55024 (Certificate No.: RSZ08041602-1, RSZ08041602-1) |
||
|
ISO 9001:2008 |
||