 |
Infinova's V2015 series video matrix switcher features comprehensive functions for any security/ surveillance system, pre-configuration to assure the highest level of reliability, and modular architecture for ease of installation and operation. V2015 represents the peak of video matrix switching technology while remaining a highly cost effective solution.
Utilizing microprocessor technology, the V2015 series can provide automated electronic surveillance or it can allow a single user to control an entire CCTV system of up to 80 video inputs by 16 video outputs. In an automated environment, the user can pre-define up to 64 system tours, 64 salvos, 35 event timers, 5 alarm display modes and 3 alarm clearance modes to be performed separately on individual monitors.
The V2015 communicates with controllers or PCs via either RS-232 data or TCP/IP protocols. An entire system of up to 64 nodes can be networked and controlled from one main station via TCP/IP protocols. V2015N is also compatible with other Infinova matrix switchers, including V2011, V2020 and V2040. Infinova's V2015 series can dedicate multiple video outputs to be compressed for Video over IP. Available windows-based system setup software simplifies the initial setup procedure as well as ongoing maintenance of the system parameters. Available GUI software further simplifies the system operation through an on-screen system keyboard which is a fully functional representation of Infinova's V2117. Users can be defined at different levels of administration to further enhance the security of the system.
- Up to 80 video inputs by 16 video outputs
- TCP/IP networkable up to 64 nodes; compatible with other TCP/IP networkable switchers V2011, V2020, and V2040
- RS-232 and Ethernet communication
- Modular microprocessor based, full cross-point video matrix
- Control of fixed or variable speed pan/tilt and dome cameras operating on Manchester, or RS-485 PTZ protocols
- Non-volatile memory for storing user programming for minimum of 5 years
- 5 flexible RS-232 ports, expandable to 20 using the Port Expander V2405-4
- 1 Ethernet port, controllable by multiple Ethernet keyboards
- Alarm transferred via Ethernet to remote Ethernet matrix or computer
- 16 programmable alarm inputs and 2 relay outputs
- 4 sets of Manchester outputs, 1 RS-485 output and 1 high speed data line output
- Run and alarm status indicators
- Cascading via Ethernet up to 4 levels
- User priority and password management
- Optional Windows-based multimedia management software
V2015N-YY x ZZ
120 VAC / 60 Hz version with Networking capability
V2015N-YYL x ZZ
120 VAC / 60 Hz version with Networking and Video Looping capability
V2015NX-YY x ZZ 230 VAC/ 50 Hz version with Networking capability
V2015NX-YYL x ZZ
230 VAC / 50 Hz version with Networking and Video Looping capability
Note: YY x ZZ after part number specifies numbers of video inputs (in sub-multiples of 4) and video outputs. For example, V2015N-80 x 16 is a pre-configured matrix with 80 video inputs and 16 video outputs and networking capability is provided
|
Video |
Video Input |
75 Ohm BNC, 1.0 Vp-p composite |
|
|
|
Maximum Video Inputs |
80 |
|
||
|
Video Output |
75 Ohm BNC, 1.0 Vp-p composite |
|
||
|
Maximum Video Outputs |
16 |
|
||
|
Amplitude-Frequency Characteristics |
±1.0dB (5.8 MHz) |
|
||
|
Differential Gain |
<1.0% (typical) |
|
||
|
Differential Phase |
<1.5o (typical) |
|
||
|
S/N Ratio |
≥60 dB (typical) |
|
||
|
Cross Talk |
Adjacent Channels |
PAL: 55 dB (4.43 MHz); NTSC: 55 dB (3.58 MHz) |
|
|
|
Input to Input: |
PAL: 70 dB (4.43 MHz); NTSC: 70 dB (3.58 MHz) |
|
||
|
Return loss (input/output) |
>40 dB |
|
||
|
DC level |
0V or 400mV |
|
||
|
General |
Bandwidth |
5 Hz ~ 8 MHz |
|
|
|
Switching Speed |
20ms (typical) |
|
||
|
Non-Volatile Memory |
for a minimum of 5 years |
|
||
|
On-screen Display Items |
video input number, date/time, video input titles (maximum characters16) and monitor status |
|
||
|
Keyboard Connections |
Communication Protocol |
RS-232 or Ethernet |
|
|
|
RS-232 Port |
5 |
|
||
|
Connection Type |
8-pin, RJ-45 connector |
|
||
|
Alarm/ Relay Connection |
Alarm Input |
16 |
|
|
|
Alarm Input Connector |
One 20-pin D type |
|||
|
Input Port Status |
N.O. (Normally Open) |
|
||
|
Alarm Output |
2 |
|
||
|
Alarm Output Connector |
One 6-pin D type |
|
||
|
Contact Ratings |
1A @24 VDC, 0.5A@110 VAC |
|
||
|
Network Ethernet Connection |
Data Interface |
TCP/IP IEEE 802.3 Compliant |
|
|
|
Connection Type |
RJ-45 |
|
||
|
Data Rate |
10/100 Mbps |
|
||
|
Manchester Control Code Output |
Data Type |
Manchester control code |
|
|
|
Port |
4 sets |
|
||
|
Connection Type |
One 12-pin connector |
|
||
|
RS-485 Control Code Output |
Data Type |
RS-485 control code |
|
|
|
Port |
1 set |
|
||
|
Connection Type |
One 3-pin connector |
|
||
|
Power Supply |
Input Voltage |
120VAC / 60Hz; 230VAC / 50Hz |
|
|
|
Power Requirements |
45 W |
|
||
|
Mechanical |
Dimensions (H×W×D) |
5.25"×19.0"×13" (132 mm×483 mm×329 mm) |
|
|
|
Package Size (H×W×D) |
10.5"×22.5"×17.8" (267 mm×571 mm×451 mm) |
|
||
|
Unit Weight |
17.2 lbs. (7.8 kg) |
|
||
|
Shipping Weight |
19.8 lbs. (8.97 kg) |
|
||
|
Mounting |
Rack mount |
|
||
|
Color |
Gray |
|
||
|
Environmental |
Operating Temperature |
32° F ~ 140° F (0° C ~ 60° C) |
|
|
|
Operating Humidity |
0~90%RH (non-condensing) |
|
||
|
Certifications |
CE/EMC: EN 55022; EN 55024 (Certificate No.: RSZ07080904-1& RSZ07080904-2); FCC Class A (Certificate No.: RSZ07080904); CE/LVD: EN 60950-1:2006 (Certificate No.: RSZ07080903-3); ISO 9001:2008 |
|
||
|
Compliance |
FCC Part 15 Class A, UL Listed, cUL Listed |
|
||